The Chainlink

What seat heights do you guys use on Divvy, and how tall are you?

I'm 6'1" and I set the seat height to 9.

Views: 747

Reply to This

Replies to This Discussion

I tried to make a chart, but couldn't load it to chainlink comments.

You could always do a screenshot of it and post the image. Or import into Google Drive and share the link.

6' and 9. If wearing winter boots, 9.5.

I’m 4 foot 9 inches.  I can’t remember what height since it’s been a long time since I’ve rode a divvy, but they do fit me.  Probably not as well as taller folks, but I can get around, even when I was a couple months pregnant.  If anything, a divvy was a bit more comfortable riding pregnant after 6 months than my road bike.

I'm 5'7", and I like 3.5 or 4 for the seat height. The bikes I find are hardly ever set to that height, and I often get greasy hands adjusting.

You shouldn't have to touch the (greased) seat post itself when adjusting the height. Just open the seat post lever, push or pull the saddle to the right height (wiggling it back and forth as necessary), and close the lever.

I know. But the lever is often greasy. 

6'0'' with long legs, 8. 

Hey, 5'10" and seat set to 7. 7.5 if wearing thick-soled winter boots.

OK, I've used my expert graphing skills to create a chart:

https://chi.streetsblog.org/2018/03/31/where-do-divvy-riders-of-var...

I'm 5'10" and set it at 8. 

I am 6' even and set it to 7.5 (between 7 and 8).

RSS

Groups

© 2008-2016   The Chainlink Community, L.L.C.   Powered by

Disclaimer  |  Report an Issue  |  Terms of Service